From BOM to delivery

Each handoff needs a controlled input, a clear acceptance point and one agreed delivered configuration.

Define what the delivered set must contain

Assembly scope begins with the current part drawings, assembly drawing and controlled bill of materials.

Define in the drawingRevision, item number, quantity per set, supplied-by party, approved hardware and substitutions.

Review focusDocument consistency, missing specifications, bought-out parts and acceptance checkpoints.

Useful RFQ question: Which document is the master source for the delivered configuration?

Align machined and purchased items

Machined parts, specified hardware and approved purchased components are coordinated against one assembly package.

Define in the drawingPart source, material and finish, hardware specification, quantity and incoming checks.

Review focusRevision match, availability, finish compatibility, handling and set completeness.

Useful RFQ question: Which components are customer-supplied and which should be coordinated?

Build to the defined relationship

Simple mechanical subassemblies are fitted in the stated sequence using the drawing and assembly notes.

Define in the drawingOrientation, fastening method, fit notes, allowed adjustment and protected surfaces.

Review focusPart fit, alignment, hardware use, visible damage and any special handling instruction.

Useful RFQ question: Which interface controls the final fit or alignment?

Verify the assembly, not only its parts

Agreed checks confirm completeness, orientation and critical dimensions after assembly.

Define in the drawingInspection point, acceptance condition, sampling, record format and responsible document.

Review focusPost-assembly dimensions, component presence, orientation, appearance and traceable results.

Useful RFQ question: What must be checked after the parts are joined?

Coordination is the capability

Drawing-controlled assembly support

The value is not a machine count. It is the controlled relationship between machined parts, approved hardware, inspection points and the delivered set.

CurrentDrawing revision

ControlledBOM and hardware

DefinedInspection points

By setLabels and packing

Scope is limited to drawing-reviewed mechanical assembly support. Requirements outside that scope are discussed before quotation rather than assumed.

Assembly work that fits this route

The strongest fit is a clearly documented mechanical set whose parts, hardware and acceptance points can be reviewed together.

A-01

Machined brackets with hardware

Prepared machined parts supplied with the specified fasteners and documented orientation.

A-02

Fitted component sets

Sleeves, spacers, pins and mating components grouped or fitted to the approved drawing.

A-03

Fixture and equipment subassemblies

Simple mechanical sets that need completeness, key-dimension and packaging checks.

One package, five controlled handoffs

The process keeps revisions, parts, assembly notes, inspection and packing aligned.

Review drawings and BOM

Resolve configuration, sources and acceptance notes before work begins.

Coordinate components

Prepare machined parts and approved hardware against the same revision.

Fit and assemble

Follow orientation, fastening and handling notes defined by the package.

Inspect defined checkpoints

Verify completeness, fit and post-assembly requirements.

Label and pack by set

Protect and identify each delivered configuration for receiving.

Quality at the interfaces

Assembly checks focus on what changes when separate parts become one delivered mechanical set.

Revision and completenessPart numbers, quantities, hardware and current documents are checked together.

Fit and orientationMating relationships, direction and visible condition are confirmed against the drawing.

Post-assembly checkpointsCritical dimensions, labels, packaging and requested records are reviewed before shipment.

Prepare an assembly RFQ

Define the delivered configuration so machining, hardware, checks and packaging can be reviewed together.

Part drawings and revisions
Assembly drawing
Controlled BOM
Hardware specifications
Quantity per set
Fit and orientation notes
Post-assembly inspection points
Labels, packaging and documents

Send the requirement in context

Share the drawing package and identify the feature that controls fit, function, inspection or delivery.

Start RFQ

Mechanical Assembly Services

From BOM to delivery

Define what the delivered set must contain

Align machined and purchased items

Build to the defined relationship

Verify the assembly, not only its parts

Deliver organized, protected sets

Coordination is the capability

Assembly work that fits this route

Machined brackets with hardware

Fitted component sets

Fixture and equipment subassemblies

One package, five controlled handoffs

Review drawings and BOM

Coordinate components

Fit and assemble

Inspect defined checkpoints

Label and pack by set

Quality at the interfaces

Prepare an assembly RFQ

Send the requirement in context

Mechanical Assembly Services

From BOM to delivery

Define what the delivered set must contain

Coordination is the capability

Assembly work that fits this route

Machined brackets with hardware

Fitted component sets

Fixture and equipment subassemblies

One package, five controlled handoffs

Review drawings and BOM

Coordinate components

Fit and assemble

Inspect defined checkpoints

Label and pack by set

Quality at the interfaces

Prepare an assembly RFQ

Send the requirement in context

Related manufacturing routes